Using The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box) - Toshiba 51H85C Owner's Manual

Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 18 and 19.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Press to directly access
DVD chapters higher than 10.
Accesses a DVD's top menu.
Required by cable converter boxes to
change the channel.
Device Switch
Set to "TV" to control the TV; "CBL/SAT" to
control a cable converter box or satellite
receiver; "VCR" to control a VCR; "DVD"
to control a DVD player or HTIB.
Press during play or record mode to
pause the picture; press again to restart.
To view one program while recording
another, press to select TV mode.
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
Starts tape recording.
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
20
Point the remote control
directly at the device.
TV / VIDEO RECALL
INFO
1
4
7
+10
+10
100
FAV
TOP MENU
MENU
DVDMENU
ENTER
FAV
TV
CBL/SAT CH
VCR
DVD
POP DIRECT CH MUTE
PAUSE
TV/VCR PAUSE
FREEZE
TV/VCR
REW FF
CH SCAN SWAP
REC
REW
REC
CT-90159
FF
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device's original remote
control.
POWER
POWER
Turns the selected device on and off.
2 3
INFO
Displays on-screen information.
5 6
Channel Numbers (0-9)
Press to directly access channels (as
8 9
opposed to CH y z).
CHRTN
0
DVD MENU
ENT
Accesses DVD menus.
GUIDE
Displays channel guide.
y z x •
Press to navigate DVD menus (may not
work on some DVD players).
CLEAR
Press to reset the title and chapter
number.
VOL
CH y z
y selects the next higher channel;
z selects the next lower channel.
SLEEP
STOP PLAY
PLAY
SOURCE SPLIT
Begins playback of a tape or DVD.
SKIP / SEARCH
STOP
POP CH
Stops the tape or DVD.
LIGHT
SKIP/SEARCH
Skips forward to locate later DVD
chapters.
SKIP/SEARCH
Skips back to beginning of current DVD
chapter or locates previous chapters.