Programming The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box); Remote Control Codes - Toshiba 62HM14 Owner's Manual

Programming the remote control to operate a
cable converter box, satellite receiver, VCR,
DVD player, or HTIB (home theater in a box)
Your Toshiba TV remote control is preprogrammed to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device (or a Toshiba device that it is not preprogrammed
to operate), follow the steps below. For details on using the remote
control to operate the device, see page 20.
1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
2. Set the Device Switch to the type of device you are programming
the remote control to operate — CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).
3. While holding down RECALL, press the Channel Number
buttons to enter the 3-digit code for your device.
4. To test the code, turn on the device, point the remote control at
it, and press POWER. See note at right.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1–4 using
another code.
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
DEVICE

Remote control codes

In some cases you may not be able to operate your device with the TV
remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, use the device's
remote control.
Cable converter
box
ABC: 061, 062, 063,
082, 084, 087, 091,
092, 096, 098
Archer: 065, 092, 097,
099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094
General Instruments:
062, 089, 096
18
62HM14(E)17-21 18
CODE DEVICE
Hamlin: 093 RCA: 064, 081
Hitachi: 062, 095, 096 Realistic: 065
Jasco: 097 Recoton: 102
Jerrold: 062, 069, 071, Samsung: 077, 090
082, 086, 089, 091, Scientific Atlanta: 063,
096 078, 079, 080, 088,
Magnavox: 072, 096 098, 101, 105
Memorex: 091, 092, 104 Sears: 095
Multi Canal: 090 Signature: 062
Novavision: 101 Signature 2000: 096
Panasonic: 081, 083, 085 Sprucer: 081, 085
Philco: 087 Starcom: 069, 082, 087,
Philips: 066, 067, 068, 096, 103, 104
070, 072, 073, 074, Stargate: 069, 090
075, 091, 092 Sylvania: 095, 100
Pioneer: 076, 077 TeleView: 090
Proscan: 061, 062 Texscan: 100
Radio Shack: 092, 097, Tocom: 071, 084, 085
099
POWER
TV / VIDEO RECALL
INFO
1 2 3
4 5 6
8 9
7
CHRTN
+10
0
100
ENT
FAV
MENU
DVDMENU
FAV
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE STOP PLAY
FREEZE SOURCE SPLIT
Note:
REW FF SKIP / SEARCH
• In addition to POWER, confirm that all CH SCAN SWAP POP CH
REC
LIGHT
necessary keys on the TV remote control
operate your device. If some keys are not
operational, repeat the device code setup
using another code (if other codes are
listed for your device). If, after trying all
listed codes, the necessary keys do not
CODE
operate your device, use the device's
original remote control.
• Every time you change the batteries, you
will need to reprogram the remote control.
• Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
"VCR1/VCR2. " If your VCR has this kind of
switch and does not respond to the codes
for your VCR brand, set the switch to the
other position ("VCR1" or "VCR2") and
reprogram the remote control.
U. S. Electronics: 087, General Instruments:
096, 098
United Cable: 082
Universal: 065, 092, 097, Hitachi: 033
099, 102, 103 Hughes: 033
Wards: 096 Hughes Network
Intersat: 048
Satellite receiver
Janeil: 027
Alphastar: 038, 059
JVC: 017, 057
Chaparral: 034
Kenwood: 029
DISH Network: 057
Magnavox: 060
Drake: 020, 040, 044,
Optimus: 058
046, 050, 053
Pansat: 036, 052
Echostar: 018, 041, 051
Primestar: 015, 042
Express Vu: 057
Proscan: 008, 009, 013
Fujitsu: 027
Radio Shack: 022, 023,
GE: 008, 009, 013
1/24/05, 1:44 PM
RECALL
POWER
Channel
Number
Device Switch
010, 011, 012, 022,
023, 031, 049
Systems: 019
030