Adjusting The Sound Quality; Selecting The Dual 1 Or Dual 2 Mode - Toshiba 37XV500A Owner's Manual

1
Press M, then press Y or Z to display the SOUND
menu.
MTS
Dual
Bass
Treble
Balance
WOW
MENU Back EXIT
2
Press V or U to select MTS, then press Y or Z to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 22).

Selecting the dual 1 or dual 2 mode

- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programmes are received.
1
Press M, then press Y or Z to display the SOUND
menu.
2
Press V or U to select Dual, then press Y or Z to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programmes
1
When a stereo programme is received, d Stereo
appears.
2
Press S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Stereo
Selecting the bilingual programmes
- analog only -
1
When a bilingual programme is received, j Dual
appears.
2
Press S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Dual 1
22
Using the TV's features (General)
SOUND 1/2
Auto
Dual 1
0
0
0
OK
Watch TV
- analog only -
Display
NICAM
j Dual 1 Sub I sound
J Dual 2 Sub II sound
e Mono Main sound
Note:
These settings are not stored in the TV memory.

Adjusting the sound quality

1 From the SOUND menu, press V or U to select an item
you want to adjust.
2 Press Y or Z to adjust the settings as required.
Bass
Y
Selection
Bass weaker
Treble weaker
Balance decreases the right
channel
®
Using the SRS WOW
®
SRS WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV's
audio will sound fuller, richer and wider.
®
WOW consists of three features; SRS 3D
®
and SRS TruBass , being turned on.
1 From the SOUND menu, press V or U to select WOW,
then press Q.
2 Press V or U to select an item you want to adjust, then
press Y or Z to adjust the settings as required.
SRS 3D
FOCUS
TruBass
MENU EXIT
Back
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D
work.
• WOW, SRS and l symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
®
• The SRS WOW effect is active only when the sound outputs
from the speaker.
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
0
Z
Pressing
stronger
stronger
decreases the left
channel
surround sound
®
, SRS FOCUS
WOW
Off
On
High
Watch TV
®
effect does not
®
,