Watching Tv Programmes - Toshiba 37XV500A Owner's Manual

Watching TV programmes

Viewing Digital programmes
After you have tuned the TV, you have several ways to
navigate through all programmes:
• Press the Number buttons (a channel number has 4-digits)
and you may omit the leading zeroes, which will be
appended automatically; (Please note that if you have
channels with different frequencies but the same channel
number, the TV will always tune to the first channel that has
been stored into the channel database. To view the other
duplicating channels, you can select the channels from the
Navigation List (see below) or use the P U / P u buttons.)
• Press P U / P u to view the previous and next programme.
The channels are arranged in ascending order according to
the channel number.
• Press twice to display Favorite channel list and press
V or U to select a programme, then press Q to view the
favorite programme. Alternatively activating the Favorite
Mode, then press P U / P u to select channels in Favorite
channel list. See page 31 for more details.
Selecting channel from Navigation List
- digital only -
1
When viewing in Digital TV, press
Navigation List.
Navigation List
Discovery Mediacorp
0007 7 Digital 1 0008 8 Digital 1
0070 7 Digital 2 0080 8 Digital 2
0081 8 Digital 3
0082 8 Digital 4
Back Navigate
2
Press V, U, Y and Z to select previewed programme,
then press Q.
3
Press P to exit the menu and watch the previewed
channel.
4
Press twice to display Favorite channel list.
Changing the programme position
1
Enter the desired programme position number using the
Number buttons on the remote control.
For programme positions below 10, use 0 and the required
number e.g., for programme position 1.
2
You can also change the programme position by using
P U or P u.
The programme position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
The programme position selection change between different
format channels takes several seconds.
16
Getting started
- digital only -
to display the
ABC
0009 9 Digital
0090 9 Digital 1
0091 9 Digital 2
0092 9 Digital 3
Select Channel Watch TV
- analog only -
Switching between two programme
positions
You can switch two programme positions without entering
actual position number each time.
1
Select the first programme position you want to view.
2
Select the second programme position with the Number
buttons (0-9).
3
Press :. The previous channel will be displayed.
Each time you press :, the TV will switch back and forth
between the two programme positions.
Selecting the menu language
Choose from 9 different languages (English, Chinese (CS),
Malay, Thai, Vietnamese, Russian, Arabic, Persian or French)
for the On-Screen-Display.
1
Press M, then press Y or Z to display SET UP menu.
2
Press V or U to select Language.
3
Press Y or Z to select the desired language.
Language
Auto tuning
Manual tuning
AV connection
Picture position
MENU EXIT
Back
Displaying the on-screen information
- analog only -
1
Press k to display the following on-screen information.
4 ABCD
The information will disappear in 6 seconds.
• Programme position or external input mode selected
• Programme skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
2
To close the display instantly, press k again.
On-screen information
When viewing in Digital TV, the on-screen information (I-
Plate) will give the details of the channel programme
currently being viewed.
1
, to display the I-Plate.
Press
Channel 1202 ABC Sydney
Now News Today
SD
Next Rock Concert in Sydney
More Info
- analog only -
SET UP
English
OK
OK
OK
OK
Watch TV
Stereo
- digital only -
I-Plate
Dec. 25
12:30
TTX CC PG Dolby
SNR
Watch TV