Chapter 3. Setting Up Your 0578 Expansion Unit; Connecting Your 0578 Directly To Your System Unit - IBM e Server i Series Manual

Chapter 3. Setting up your 0578 expansion unit

This chapter describes how to set up your 0578 Expansion Unit.
If you have not powered down your system unit, go to "Powering down your
iSeries system unit" on page 6. Once you have powered down your system unit,
return here.
Removing the covers
See Appendix A, "Removing the back covers" on page 31 if you need help
removing the covers on your expansion units or system unit.
Connector locations
See Appendix B, "Connector Locations" on page 35 if you need help finding the
connectors on your expansion units or system unit.
Systems with a migration unit or 9079 Expansion Unit
If your system unit has a migration unit or 9079 Expansion Unit, read Appendix D,
"Cabling rules for systems with a migration unit or the 9079 and 9094 expansion
unit" on page 45 before you proceed.

Connecting your 0578 directly to your system unit

This section describes how to connect your 0578 directly to your iSeries system
unit.
If you encounter difficulties during the procedure, contact your authorized dealer
or service provider.
© Copyright IBM Corp. 2000, 2002
15