Displaying Tv Status Information; Understanding The Auto Power Off Feature; Understanding The Last Mode Memory Feature - Toshiba 2XF550U Owner's Manual

Displaying TV status information

To display TV status information using RECALL:
Press E on the remote control.
The following information will display (if applicable):
Current input (ANT/CABLE, Video 1, etc.)
•
If ANT/CABLE is the current input, either "CABLE" (for
•
cable TV) or "ANT" (for over-the-air broadcasts).
Channel number (if in ANT/CABLE mode)
•
Channel label (if set)
•
Digital signal strength indicator (bar graph in lower right
•
corner of box; for ATSC signal only)
Stereo, Mono or SAP audio status (when HDMI input mode,
•
Dolby Digital or PCM)
Video resolution
•
Aspect ratio of incoming video signal (4:3 or 16:9)
•
V-Chip rating status
•
GameTimer (if set)
•
x.v.Color status of incoming signal
•
ANT
1080i
Stereo SAP
123-456
ABCHD
: 120min
To close the RECALL screen:
Press E again.
To display TV status information using INFO:
(only available for ANT/CABLE input)
Press Q on the remote control.
The following additional information will display for off air
digital channels (if applicable):
Title
•
Duration
•
Detailed description
•
To display Next information, press Q on the remote control
again. Pressing Q a third time will remove the entire banner.
ANT
1080i
Stereo SAP
123-456 ,
MLB Young s XXX...
ABCHD ABCHD ,
Today s Major League Baseball.
: 120min
Note: The location of the banner can be moved to the top or
bottom of the screen by pressing B or b while the RECALL or
INFO display is on-screen. (The last position will be stored to
memory.)
60
Chapter 6: Using the TV's features
TV-PG L V
16:9
9:00pm .
16:9 TV-PG L V
9:00pm - 11:00pm EST
Understanding the auto power off
feature
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT/CABLE mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the TV
when the power is resupplied.
Note: If it's possible, and you will be away from the TV for an
extended period of time you should unplug the power cord.