Toro Warranty And Support - Toro EVOLUTION Series Manual

Toro Support
Toro Commitment to Quality
Toro is committed to developing and producing the highest quality, best performing,
most dependable products on the market. Because your satisfaction is our first priority,
we have provided the Toro Helpline to assist you with any questions or problems that
may arise. If for some reason you are not satisfied with your purchase or have questions,
please contact us toll free at 1-877-345-8676.
Warranty
The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agree-
ment between them, jointly warrants, to the owner, against defects in material and
workmanship for a period of five years from the date of purchase. Neither The Toro
Company nor Toro Warranty Company is liable for failure of products not manufac-
tured by them, even though such products may be sold or used in conjunction with
Toro products.During such warranty period, we will repair or replace, at our option,
any part found to be defective. Return the defective part to the place of purchase.
Our liability is limited solely to the replacement or repair of defective parts. There
are no other express warranties. This warranty does not apply where equipment is
used, or installation is performed, in any manner contrary to Toro's specifications and
instructions, nor where equipment is altered or modified. Neither The Toro Company
nor Toro Warranty Company is liable for indirect, incidental or consequential damages
in connection with the use of equipment, including but not limited to: vegetation loss,
the cost of substitute equipment or services required during periods of malfunction
or resulting non-use, property damage or personal injury resulting from installer's
negligence.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. All implied
warranties, including those of merchantability and fitness for use, are limited to the
duration of this express warranty. Some states do not allow limitations of how long an
implied warranty lasts, so the above limitation may not apply to you. This warranty gives
you specific legal rights and you may have other rights which vary from state to state.
Australian Warranty Statement
This product comes with a manufacturer's guarantee against defects in material
and workmanship when used for its intended purpose. Our obligation under this
guarantee is limited to the repair or replacement of the product at our discretion for the
period stated. In the event of a claim, you must immediately cease using the product
and return the product, together with your proof of purchase and an explanation of
the fault to the store you purchased it from. All costs associated with the return of the
product are the purchasers' responsibility. To process the warranty, the retailer must
contact Toro Australia via their representative or the phone number listed below.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
Toro Australia Pty Ltd, 53 Howards Road, Beverley SA 5009 1300 130 898, info.au@
toro.com
FCC Part 15 Rules
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment generates interference to radio or television
reception, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet prepared by the Federal Communications
Commission helpful: "How To Identify and Resolve Radio-TV Interference Problems".
This booklet is available from the U.S. Government Printing Office, Washington, DC
20402. Stock No. 004-000-00345-4.
15