Review; Resetting To Factory Defaults; Wireless Communication Problems - Toro EVOLUTION Series Manual

Review Screen
The Review screen allows you to review settings for the various
sensors added to the controller.
1. Press the Review button.
to the WEATHER SENSOR. Press
2. Press

REVIEW

SCHEDULE A
SCHEDULE B
AUX 2
RAIN SENSOR
WEATHER SENSOR
3. Use to scroll through the various sensor settings.
REVIEW
WEATHER SENSOR
ADJUST
RAIN STATUS
SENSOR TEMP
SIGNAL STRENGTH
14

Resetting to Factory Defaults

1. Go to the Sensors screen (page 10) and scroll down to
.
2. Change the value to YES and press

Wireless Communication Problems

---
The effective range of the EVO-WS Weather Sensor is 1,000 feet. That
WET
range can be impacted by walls and/or electrical appliances that cause
81 ° F
radio interference.
If you experience wireless communication problems, try the following:
•
Resetting to Factory Defaults clears ALL SENSOR
!
SETTINGS and ALL ADDED IDs.
SMART CONNECT. Press
SENSORS
A
SOIL 1 -
SOIL 2
SOIL 3
SMART CONNECT
Install the sensor as close to the controller location as possible. If
the signal strength is not good in one location, try another location
nearby. Sometimes moving the sensor only a few feet can greatly
improve signal strength.
.
B C
-
.