Setting The Hdmi™ Audio Mode - Toshiba 26AV502U Owner's Manual

To create and assign a custom label:
1�
Open the Channel Labeling window.
2�
Press or to select a channel you want to label.
3�
Press pqu to highlight Custom and press
The software keyboard will appear.
4�
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
5�
The highlighted character is entered after you either press
a different key, press u key, or after a two-second pause.
6�
Repeat steps 4 and 5 until you have entered all desired
text.
7�
When finished, press
8�
New labels will be added to the list in alphabetical order
and marked with an icon to indicate that they are
custom. Highlight the new custom label and press
assign.
Assigned channel labels will be displayed in the banner,
Channel Add/Delete, Channels Block, and Channel
Browser.
To delete the custom label:
1�
Open the Channel Labeling window.
2�
Highlight the label to be deleted and press
3�
Highlight Yes from the deletion confirmation window
and press .
4�
Highlight Done and press
back to the Channel Labeling window.

Chapter 5: Setting up your TV
.
.
.
to save changes, and go
Setting the HDMI™ audio mode
To set the HDMI audio mode:
1�
Press and open the Audio menu.
2�
Highlight Audio Setup and press
3�
Press p or q to select HDMI 1 Audio and then press
t or u to select the HDMI 1 audio mode (Auto, Digital,
or Analog). (Auto is the recommended mode.) See
"Connecting an HDMI or DVI device to the HDMI
input" ( page 17).
Mode
to
Auto
Digital
Analog
4�
To save your settings, highlight Done and press
Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to "No,"
the HDMI 1 Audio setting changes to "Auto." If PC Audio is
set to "Yes," the HDMI 1 Audio setting is set to "Digital" and
is grayed out in the menu. (Also see item 3 on page 11 and
"Setting the PC Audio" on page 49.)
.
Description
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
available, it will be output. If not, the
TV will automatically detect and output
analog audio from the PC Audio input.
When viewing the HDMI 1 input,
digital audio from the HDMI input will
be output.
When viewing the HDMI 1 input,
analog audio from the PC Audio input
will be output.
.