Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View; Labeling The Video Input Sources - Toshiba 26AV502U Owner's Manual

Selecting the video input source
to view
To select the video input source to view:
1
Press on the remote control or TV control panel.

And then either:
a) Press 0–7; or
b) Repeatedly press
pq
press to change the input; or
c) Repeatedly press on the remote control or TV
control panel to change the input.
The current signal source displays in the top right corner
of the Input Selection screen.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
( "Labeling the video input sources" at right).
• Sources can be "hidden" ( "Labeling the video input
sources" at right).
• "No Video Signal" will appear randomly on the screen if no
signal is received in video input mode.


Chapter 6: Using the TV's features

on the remote control and then

Labeling the video input sources

You can label each video input source according to the type
of device you connected to each source, from the following
preset list of labels:
– – (default label)
•
Audio Receiver
•
Cable
•
Compact Disc
•
DTV
•
DVD
•
Game Console
•
HDMI Switch (HDMI inputs only)
•
Laser Disk
•
Satellite/DSS
•
VCR
•
Video Recorder
•
Hide (to hide an unused input in the Input Selection screen and
•
in the Channel Browser Inputs list)
Note: If you select PC in the Input Selection screen, you can
choose only "– –", "Game Console", or "Hide" as the label.
To label the video input sources:
1
Press and open the Preferences menu.

Highlight Input Labeling and press

Press or to highlight the video source you want to
p q
label.
.
(continued)