Toshiba TEC B-SX4T Network Specification page 25

(4) How to store print jobs
To store a real-time print job, write a file into the PRTDATA folder in the ATA card. To store
a spooled print job, write a file into the PRTPOOL folder in the ATA card.
NOTE: Specify the print job name (file name) with a maximum of 8 and 3 alphanumeric
characters for a file name and an extension, respectively.
File name format:
If the same print job name (file name) as the existing file is used, new data will
overwrite.
• Using the FTP function
Connect to the printer via FTP.
PRTDATA folder in the ATA card. To store a spooled print job, copy a file into the
PRTPOOL folder in the ATA card. For details on the FTP functions, see chapter 9 "FTP
SERVER".
• Using the mail function
Attach a file to be stored as a print job to e-mail, and input the printer's mail address.
Then, send e-mail to the printer.
To store a file as a real-time print job, the subject should include "PRTDATA:". To store
a file as a spooled print job, the subject should include "PRTPOOL:". For details on the
mail functions, see chapter 10 "MAIL FUNCTION".
NOTES: • If any subject other than "PRTDATA:" and "PRTPOOL:" is described, the
printer prints an attached file immediately when receiving e-mail. The file is
not stored on the ATA card as a print job.
• When a print job is stored by sending a file by e-mail, a temporary file is
created on the ATA card. Therefore, the ATA card requires 4-times larger
free space than the file size to be sent. If the ATA card does not have
enough free space, the printer does not receive e-mail. The e-mail is not
deleted from the mail server, but remains there.
.
Job name (File name) Extension
To store a real-time print job, copy a file into the
- 22 -