Ip Filter - Planet ICA-4200 User Manual

3.5.4 IP Filter

When this IP camera is directly connected to Internet and not protected by firewall, this
function acts like a mini built-in firewall to protect the safety of this IP camera and avoid attacks
from hackers.
Enable Filter
Accepted IP List
IP Address
(Accepted IP List)
Deny IP List
IP Address
(Accepted IP List)
When you finish with the above settings, click the 'Apply' button to save changes.
Check this box to enable IP address filter; uncheck this box to
disable this function.
It lists all IP addresses that can build connections to this IP
camera. If you want to remove a set of IP addresses from the list,
click on the IP address and click the 'Remove' button.
Input the starting and ending IP address you wish to accept
connections here. IP camera will only accept connections
established from these IP addresses. If you want to specify one IP
address only, input the same IP address in both fields. Click the
'New' button to add IP address to the accepted IP list.
It lists all IP addresses that cannot build connections to this IP
camera. If you want to remove a set of IP addresses from the list,
click on the IP address and click the 'Remove' button.
Input the starting and ending IP address you wish to deny
connections here. IP camera will deny connections established
from these IP addresses. If you want to specify one IP address
only, input the same IP address in both fields. Click the 'New'
button to add IP address to denying IP list.
33
Ultra-mini Full HD Fixed Dome IP Camera
ICA-4200