Clearing A Preset Station - Toshiba D-VR3SB Owner's Manual

To... Then....
10
Select a Character Press the
the required name character
is displayed (letters, numbers
or " - " character)
Move to the next or Press the
previous character respectively.
If you..
11
Wish to store the • Press the
station displayed
• Press the
• Select Done to store the station.
Do not wish to store • Press the
the station displayed the CH is selected.
• Press the
• Go back to the beginning of
❷
Press the buttons to select Done and then
12
press OK button to confirm manual setting.
• Repeat this procedure from step 5 onwards,
until all the required stations have been stored.
❷
button until
➛ ❿
buttons
Then....
❷
buttons until
the MFT is selected.
➛ ❿
buttons to
adjust the picture, if neces-
sary.
❷
buttons until
➛ ❿
buttons to
go on scanning the frequen-
cy band and display the
next station.
step.
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme positiom you can cancel it.
Open "MENU"
1
With the DVD in Stop mode, press the MENU
button.
Select "Setup"
2
❷
Using the buttons, move the selection bar
to "Setup" then press
Select "Install"
3
❷
Using the buttons, move the selection bar
to "Install", then press
Programme
Select "Manual Setup"
4
❷
Using the buttons, move the selection bar
to "Manual Setup" then press
select.
Programme
❿
or OK button to select.
❿
or OK button to select.
❿
or OK button to
: Ch 60
English - 31