Dimension Drawing; General Notes - Siemens 5WG1 201-2DBx3 Series Technical Product Information

Gamma arina touch sensor

Dimension drawing

Dimensions in mm
UP 20x, UP 28x/3 and UP 28x/5
Siemens Building Technologies
single
double
quadruple

General notes

• The operating instructions must be handed over to the
• Any faulty device is to be sent together with a return
• If you have further questions concerning the product
 +86 (10) 4006306090
 support.ap.i-bt@siemens.com
Note:
This product supports two different operation modes:
KNX and PL-Link.
This document describes the KNX functionality that can
be configured with ETS.
For PL-Link refer to documentation for Desigo.
Subject to change without further notice
Technical product information
client.
delivery note of the local Siemens office.
please contact our technical support.
Update: http://www.siemens.com/gamma
Gamma instabus
June 2014
Technical product information
2.16.1.13/9