Tuning The Tv Stations Manually - Toshiba SD-37VBSB User Manual

Tuning the TV stations manually

The Auto setup function (see page 15)
memorizes all broadcasts to the suit-
able CH positions.
However some broadcast may not be
memorized due to weak signal. In this
case, use manual tuning function.
CH 01 BBC 1
CH 02 BBC 2
CH 03 ITV
CH 04 CH4
CH 05 CH5
CH 06 SATELLITE
Note:
Occasionally, the auto search might catch
a weak signal and stop. If the TV station
signal is weak, you shouldn't store this
station.
In that case restart the auto search using
or .
18
2J50101A [EN] P18-19
Preparation
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will
light)
Example: Preset the BBC 2 on programme position 2.
1
Press VCR MENU.
Press
TUNING. Then press ENTER.
2
Press
(rising frequency)
once to start the search. It stops
at each broadcast automatically
(" " changes to " "). Press
or
appears. Only in case of
receiving of the weak broadcast
(drifting picture), search does not
stop. If you want to stop, press
or .
Press ENTER to preset. The
search menu screen will
disappear if the next mode is
not activated in less than 50
seconds.
3
Press
is displayed. (Or enter 0 2 with
the Number buttons (0-9)). Then
press ENTER.
4
Repeat the steps 2 and 3 to preset other TV stations.
5
Press VCR MENU repeatedly until the TV picture
appears on the screen.
18
or to select the CH
(falling frequency) or
repeatedly until BBC 2
or repeatedly until 2
27/2/06, 5:39 PM
TIMER REC SET
AUTO REPEAT [OFF]
NICAM [AUTO]
CH TUNING
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT : MENU
CH 1
SEARCH :
EXIT : MENU
CH 1
CH : / 0Ð9
EXIT : MENU
OK : ENTER
CH 2
SEARCH :
OK : ENTER EXIT : MENU