Setting The Time And Date Manually - Toshiba SD-37VBSB User Manual

You must set the date and time
manually for timer recordings if
Auto setup process did not set
them correctly.
Notes:
• In case of a power failure, the clock will
continue to operate for another 30 min-
utes with quartz-controlled precision.
To indicate that the power failure has
lasted for an excessive period of time "-
-:--" will appear on the display. In this
case readjust time and date.
• The AUTO TIME function adjusts the
clock only if the error is within 5
minutes.
• The VCR automatically adjusts the
clock setting for Daylight Saving Time
once you set AUTO TIME to ON.
2J50101A [EN] P14-17

Setting the time and date manually

Preparation:
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
Example: Setting the clock to "11:30" October, 28 (SAT), 2006.
1
Press VCR MENU. The VCR menu screen will appear.
2
Press
TEM SETUP, then press EN-
TER.
3
Press
SET, then press ENTER.
4
Press
"28" appears. Then press
5
Set the month, year, hour and
minute as in step 4.
Then press ENTER.
• In case of an erroneous input,
press
ous step and enter again.
6
Press
The VCR automatically corrects the clock setting every hour
once you set AUTO TIME to ON.
7
Press VCR MENU repeatedly until the TV picture appears on
the screen.
8
The clock will begin operation.
17
or to select SYS-
SELECT :
ENTER : ENTER
EXIT
or to select CLOCK
or repeatedly until
CLOCK SET
.
SELECT :
SET
OK
CLOCK SET
to go back to previ-
SELECT :
SET
OK
or to select AUTO TIME ON or OFF.
27/2/06, 5:39 PM
TIMER REC SET
[OFF]
AUTO REPEAT
NICAM [AUTO]
CH TUNING
SYSTEM SETUP
: MENU
LANGUAGE/SPRACHE/LANGUE
LINGUA/LENGUA
DAY 28 SAT
MONTH 1
YEAR 2006
TIME 0:00
AUTO TIME ON
:
: ENTER EXIT : MENU
DAY 28 SAT
MONTH 10
YEAR 2006
TIME 11:30
AUTO TIME ON
:
: ENTER EXIT : MENU
VCR
17