Programming Delay Start - Electrolux 816 Manual

Deep Rinse
Delay Start
The DEEP RINSE option is selected by pressing the ECO RINSE pad
until the DEEP RINSE progress indicator light is 'ON'.
When DEEP RINSE is selected the light above the ECO RINSE
selection button is 'OFF'.
Use the Deep Rinse option if you want to use fabric softener.
You can start a wash programme after a certain number of
hours have elapsed, ranging from 1 hour to 23 hours, using the
DELAY START option.
For example if you want to start a wash cycle 4 hours from the
current time then proceed as follows:
1. Load the clothes into the washing machine.
2. Pour the detergent down the centre of the agitator after
removing the lint filter see page 8.
3. Select your wash programme.
4. Select other options if required.
5. Press the DELAY START button.
The Electronic display will show the alternating 'flashing'
symbols 'dE' and '01' indicating a delay start of 1 hour.
6. Press DELAY START repeatedly until the required delay time is
shown in the display eg.
The washing machine will start the wash cycle in 4 hours time.
To set a delay start using a favourite wash cycle proceed as follows:
1. Press POWER on.
2. Press FAVOURITE.
3. Press START/PAUSE.
4. Press DELAY START repeatedly until the required delay time is
shown in the display eg.
The washing machine will start after the delayed time has
expired.
NOTE: To cancel a DELAY START press START/PAUSE.
01-->02-->03-->04.
etc.
01-->02-->03-->04
13