Configuring Software; Setting The Communications Options Manually - Xilinx HW-130 User Manual

description of the menus and command buttons.
Configuring Software
The HW-130 software automatically configures the programmer and
your host computer for reliable communications. The default ports
that the PC or Workstation uses to find the HW130 programmer, are
listed in Table 1-2. Once configured, the communications settings can
be saved by selecting Save Settings from the File menu.
If the software cannot find the programmer, a dialog box is displayed
with a list of possible causes. Check to see that you have read and
write permissions on the serial ports for the workstation.
Table 1-2 Default Ports

Setting the Communications Options Manually

Once configured the HW-130 Programmer software operates at
standard baud rates that include: Auto, 1200, 2400, 4800, 9600, 19200,
and 38400 baud. Use the HW-130 Programmer software to change the
baud rate and the communications port if necessary.
Note: The DOS version also supports the 57600 and 115200 baud
rates.
1. Select Options
HW-130 Programmer User Guide
Platform Default Ports Used
PC COM1 COM2 COM3 COM4
Sun4 ttya
Solaris ttya
HP700 ttya
IBM RS6000 ttya
ttyb
ttyb
ttyb tt00 tt01
ttyb tty0 tty1
Communications to display the
Getting Started
1-15