Display; Status Bar; Installing Software On A Workstation From Cd-Rom; Loading The Cd-Rom Into The Drive - Xilinx HW-130 User Manual

Display

The display includes fields that are updated with the device type, the
design name, and the device quantity that you select. Additional
information appears as you perform programmer operations.

Status Bar

The status bar is located at the bottom of the HW-130 Programmer
window. It provides information about the commands that you are
about to select or that are being processed.

Installing Software on a Workstation from CD-ROM

This section explains how to install and run the HW-130 software on
a Sun4 (SunOS and Solaris), HP9000/700 and IBM RS6000
workstations. The HW-130 software product has a graphical interface
and requires an X-based Windows Manager.
These instructions describe how to:
Note: The commands in these instructions show the default device
name for a CD-ROM drive. Device names may be different on your
system. If you encounter problems, check your hardware reference
manuals or ask your system administrator.

Loading the CD-ROM into the Drive

Put the CD-ROM in a caddy and insert the caddy into the drive. A
caddy is a plastic case that holds the disk. Load the disk so the
printed side is facing up.

Checking Whether the CD-ROM Drive is Mounted

You need to have the CD-ROM drive mounted before you can install
HW-130 Programmer User Guide
Load the CD-ROM
Check whether the CD-ROM drive is mounted.
Mount the CD-ROM drive, if necessary.
Run the CD-ROM installation script to install the HW-130
software.
Starting the program.
Getting Started
1-9