Connecting To A Tv Equipped With Component Video Inputs - Toshiba RD-XS52SU Owner's Manual

Connections

Connecting to a TV equipped with component video inputs

If your TV has component video inputs, you can obtain pictures in better quality.
To P VIDEO OUT
B
To Y VIDEO OUT
DIGITAL AUDIO
Y P
OUTPUT
BITSTREAM/PCM
OPTICAL
R L
(red)
To audio inputs of the
amplifier
(red)
Component video outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex.Y, R-Y, R-B or
Y, C , C )
B R
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
• Make the following setting.
On-screen display
"Audio out select" "Analog 2ch"
Notes
• Refer to the owner's manual for the TV to be connected to this recorder for more information concerning an audio system.
• If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder
away from the tuner and radio.
• The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier's volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the recorder's power cord. If you leave the amplifier power on, the
speakers may be damaged.
• PROG/HDMI button is not available during the operations below.
- All HDD title delete, HDD format, DVD-RAM physical format, DVD format, TIME SLIP (Pause TV/Chase Play), Rate
conversion dubbing (Only when copying is in progress.), DVD-Video creation (EDIT MENU) (Only when copying is in
progress.) (PROG/HDMI button may not be available during some other operations either.)
28
To P VIDEO OUT
R
HDMI OUTPUT
B P R R L VIDEO
COMPONENT OUTPUT
OUTPUT
VIDEO S-VIDEO R L VIDEO
(white)
TV or monitor equipped with
Audio cable
component video (INTERLACED/
(not supplied)
PROGRESSIVE) inputs
(white)
Select Page
page 48
RF IN
(FROM ANT.)
S-VIDEO
INPUT1
RF OUT
(TO TV)
INPUT3
CHANNEL
CHANGE
S-VIDEO
IR
VHF / UHF
Video cable
(not supplied)
To P video input
R
To P video input
B
To Y video input
To switch the output signal (Progressive/Interlaced)
Press PROG/HDMI button to change the
PROG/HDMI
video output signals (progressive and
interlace) from COMPONENT OUTPUT jacks.
Change the output signals as shown on the
HDMI indicator on the front panel.
HDMI indicator
Press
illuminates " 1080i"
Press
illuminates " 720p"
Press
illuminates " 480p"
Press
off
Video output signal
480p (progressive)
480p (progressive)
480p (progressive)
480i (interlace)