Step 2: Connecting To Audio System - Toshiba HD-EP30KB Owner's Manual

Preparation (Continued)

Step 2: Connecting to audio system

Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your
player to an AV receiver with an HDMI audio input.
This connection requires selection of "Digital Out HDMI" (Step 16,
To HDMI OUTPUT
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a
receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of "Digital Out SPDIF" (Step 16,
Optical digital cable (not supplied)
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
Via analog audio output
Sound is output only in 2ch format.
Audio cable (not supplied)
To ANALOG
AUDIO OUTPUT
16
HD-EP30KE_Eng.indd 16 HD-EP30KE_Eng.indd 16
HDMI cable
(supplied)
(not supplied)
HDMI INPUT HDMI OUTPUT
AV amplifier
DIGITAL INPUT
OPTICAL
TV
ANALOG AUDIO
INPUT
AV amplifier
page 21).
Caution
• When you are connecting (via the HDMI
HDMI cable
OUTPUT jack) an AV decoder that does not
have Dolby Digital or DTS decoding capability,
be sure to set "Digital Out HDMI" (
to "PCM" or "Downmixed PCM". Otherwise,
HDMI INPUT
high volume sound may damage your hearing
as well as the speakers.
Note
• You may need to adjust the HDMI audio output
to match the capabilities of your AV amplifi er.
HDMI compatible
In this case, set "Digital Out HDMI" (
device
21) to "PCM".
page 21).
*To use the optical digital output, use an
optical cable to connect this jack to an
optical audio input on a device capable of
processing Dolby Digital, DTS bitstream, or
PCM audio.
AV amplifier
page 21)
page
07.9.3 2:01:44 PM 07.9.3 2:01:44 PM