Toshiba HD-E1KY Owner's Manual page 22

2
2
Connections
Chapter
Connecting to an TV (Continued)
Via component video input
To COMPONENT OUTPUT
To use the optical digital
output, use an optical
cable to connect this jack
to an optical audio input
on a device capable of
processing a Dolby Digital,
DTS bitstream or PCM audio. (
This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict
output of video on the component video ports when viewing high defi nition content or up-converted DVD content.
The resolution on the HDMI output will be the same as the resolution output on the component video output. Thus,
because the HDMI output can change automatically to match the maximum available resolution of your display, if you
connect both the HDMI output and component output, the resolution on the component output will change if the HDMI
output Auto-adjusts.
Via S-VIDEO or VIDEO (yellow) input
*
To use the analog sound
output, connect these jacks
to audio input jacks on your
TV using the audio cable.
Audio/video cable (supplied)
* To use the optical digital output,
use an optical cable to connect
this jack to an optical audio input
on a device capable of processing
a Dolby Digital, DTS bitstream
or PCM audio. ( page 24)
22
Component video cables
(not supplied)
To use the analog sound output, connect these jacks
to audio input jacks on your TV using the audio cable.
page 24)
After completing the connection, proceed to
Connect either.
To VIDEO To S-VIDEO
S-VIDEO cable (not supplied)
After completing the connection, proceed to
Finally connect the supplied
power cord to a wall outlet.
page 23 to make the setting.
Finally connect the supplied
power cord to a wall outlet.
480i/576i output only regardless of the resolution
settings or the connections of other output jack.
page 23 to make the setting.