Connecting To An Audio System; 7Via Hdmi Output; Via Optical Digital Audio Output - Toshiba HD-E1KE Owner's Manual

2
2
Connections
Chapter

Connecting to an audio system

You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your
player to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus
and Dolby TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding
capabilities and an optical digital input.
Via HDMI output
Make the connection as below, and set "Digital Output HDMI" (
HDMI compatible device
You may need to adjust the HDMI
audio output to match the
capabilities of your AV amplifier.
In this case, set "Digital Output
HDMI" ( page 53) to "PCM".
Caution
When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or
DTS decoding capability, be sure to set "Digital Output HDMI" (
Otherwise, high volume sound may damage your hearing as well as the speakers.

Via optical digital audio output

Make the connection as below, and set "Digital Output SPDIF" (
Caution
When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not
have Dolby Digital, DTS or MPEG decoding capability, be sure to set "Digital Output SPDIF" (
Otherwise, high volume sound may damage your hearing as well as the speakers.
24
HDMI input
HDMI cable
(not supplied)
AV amplifier
page 53).
HDMI input
HDMI output
AV amplifier
page 53) to "PCM" or "Downmixed PCM".
page 53).
Digital input
Optical
Optical digital cable
(not supplied)
HDMI cable
(not supplied)
page 53) to "PCM".