(6.1) Changing A Type Of Output Monitors; (6.2) Changing I/P Mode; (6.3) Changing Rs 232C Baud Rate; Option - Toshiba CMOS Color Camera IK-HR1D Instruction Manual

6 OPTION

Move up and down
by pressing
MENU UP,DOWN
-- 6 OPTION
MONITOR
I/P MODE
BAUD RATE
6 1 Changing a type of output monitors
Move the " " to MONITOR by pressing [MENU UP], [MENU DOWN] buttons.
Select either PC or TV by pressing [DATA UP], [DATA DOWN] buttons.
PC: When using PC as an output monitor.
TV: When using TV as an output monitor.
6 2 Changing I/P MODE
Interlace or progressive can be selected.
Move the " " to I/P MODE by pressing [MENU UP], [MENU DOWN] buttons.
Select either 1080p or 1080i by pressing [DATA UP], [DATA DOWN] buttons.
1080p: When using 1080 progressive.
1080i: When using 1080 interlace.
Note:
Select a monitor that has 1080 progressive and/or interlace modes, or the monitor will not display
the image correctly. Refer to the item "5.3 Switching I/P mode" if selecting a wrong monitor.
6 3 Changing RS 232C baud rate
Move the " " to BAUD RATE by pressing [MENU UP], [MENU DOWN] buttons.
Select either 9600bps or 19200bps by pressing [DATA UP], [DATA DOWN] buttons.

7 Returning to factory settings

The current setting can be returned to the factory default status (preset status).
(1) If the color bar pattern or characters are displayed on the screen, press the [DISP] button to disable the
color bar pattern and character display.
(2) Press [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed
for approx. 1 second.
* The only selected scene file can be returned to the factory default status. Follow the instruction as
above for every scene file when all scene files are returned to the factory default status.
Select the desired
value by pressing
DATA UP,DOWN
-- <FILE A>
PC
1080p
9600bps
MONITOR PC, TV
I/P MODE 1080p, 1080i
RS232C baud rate 9600bps, 19200bps
25