3 ) Using The Unit With External Sync Signal; (3. 1) H (Horizontal) Phase Adjustment; 4 ) Changing Hd/Vd Input/Output; Synchro. Scan Operatin - Toshiba IK-TF5 Instruction Manual

( 3 ) Using the unit with external sync signal

When adjusting H (horizontal) phase refer to the item "7.2 (5) (5.1) Adjusting horizontal phase".

(3. 1) H (horizontal) phase adjustment

Observe the external sync signal and the video signal output
waveform of the unit with a dual trace oscilloscope, and ad-
just H phase so that the H phases match.

( 4 ) Changing HD/VD input/output

(1) Put off 6 screws both on flank/top of camera chassis.
(2) Change internal switch SJ01(HD/VD).
7. 4 Synchro. Scan Operation
The shutter speed can be set by the horizontal scanning period (1H) or by the frame.

( 1 ) Setting by 1H

1/525H to 524/525H stands for the setting by the 1H and the shutter speed can be set by the 1H (31.8 ms).

( 2 ) Setting by the frame

1FRM to 512FRM stand for the setting (long period exposure) by the frame.
The video signal stored during the frame period set is output as 1 frame video image at a frame interval
specified.
VD output
Video output
Index output
(INDEX)
HD/VD OUTPUT
HD/VD INPUT high-impedance
HD/VD INPUT 75 (factory setting)
n
(4FRM setting)
Match
the phase.
n+1
External
Sync. signal
Camera
Video output
23