Selecting The Video Input Source; Labeling The Video Input Sources - Toshiba 26HF84 Owner's Manual

Selecting the video input source

Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2 or HDMI
depending on which input jacks are used for connecting the devices
(see "Connecting your TV" on page 7).
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. VIDEO3
4. ColorStream HD1
5. ColorStream HD2
6. HDMI
SELECT: [0¥6]
Pressing TV/VIDEO on the
remote control displays the
current signal source (press TV/
VIDEO again or 0-6 to change)

Labeling the video input sources

The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then press
to display the OPTION menu.
2. Press ▲ or ▼ to highlight VIDEO
LABEL.
3. Press to display the VIDEO
LABEL menu.
4. Press ▲ or ▼ to highlight the video
source you want to label.
5. Press or to select the desired
label for that input source.
6. Press EXIT to return to normal
viewing.
3R40121A/E P24-30 29
or
OPTION
ON TIMER OFF / OFF / SET
FAVORITE CH
CH LABEL
VIDEO LABEL
:SELECT :ADJUST
OPTION
1.VIDEO1 - / VCR / DVD / DTV
2.VIDEO2
- SAT / CBL
3.VIDEO3 -
4.ColorStream HD1 -
4.ColorStream HD2 -
6.HDMI -
:SELECT :ADJUST
29
Note:
When ColorStream HD 1 or HD 2 is selected,
the video OUT jack does not output a signal.
To receive a video OUT signal, use a video or
S-video IN connection instead of the
ColorStream connection.
Please note the following regarding
the HDMI source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See "Connecting
an HDMI or DVI device to the HDMI
input" on page 14 for details.
6/7/04, 18:58
TV/VIDEO
Menu
Exit