Selecting The Color Temperature; Selecting The Scan Velocity Modulation (Svm); Resetting Picture Adjustments - Toshiba 26HF84 Owner's Manual

Selecting the color temperature

Change the picture quality by selecting from three preset color tem-
peratures—cool, medium, and warm—as described in the following
table:
Mode
COOL
MEDIUM
WARM
To select the color temperature:
1. Press MENU, then press
2. Press ▲ or ▼ to highlight COLOR TEMPERATURE.
PICTURE
COLOR
TEMPERATURE
COOL
DISPLAY FORMAT
SVM
RESET
:SELECT
3. Press or
4. Press EXIT to return to normal viewing.

Selecting the Scan Velocity Modulation (SVM)

The SVM feature enhances picture contrast and sharpness. This
feature has three modes: HIGH, LOW, and OFF.
To select the SVM feature:
1. Press MENU, then press
2. Press ▲ or ▼ to highlight SVM.
PICTURE
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT
3. Press or
To turn off the SVM:
Select OFF in step 3.

Resetting picture adjustments

The RESET function adjusts the picture qualities to the following
factory settings:
Mode ............................ sports
Brightness ............ center (50)
Contrast .................. max (25)
Color .................... center (25)
To reset the picture adjustments:
1. Press MENU, then press
2. Press ▲ or ▼ to highlight RESET, and then press
PICTURE
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT
3R40121A/E P31-37 36
Picture Quality
Blueish
Neutral
Reddish
or to display the PICTURE menu.
COOL
/ MEDIUM / WARM
1080i
HIGH
:ADJUST
to highlight the mode you prefer.
or to display the PICTURE menu.
COOL
1080i
HIGH
HIGH / LOW / OFF
:ADJUST
to select the mode you prefer.
Tint .......................... center (0)
Sharpness ............. center (25)
Color temperature ............ cool
SVM ................................. high
or to display the PICTURE menu.
COOL
1080i
HIGH
:ADJUST
Note:
SVM is not required when viewing some
high-quality video material. If you are
watching high-quality video material, you may
want to set SVM to OFF.
.
36
6/7/04, 18:58
Menu
Exit
Menu
Menu