Table of Contents
Advertisement
8. SENDING TONE SIGNAL (for Pulse service user)
Even if you have Pulse service (the dial mode is set to Pulse), you can
use this phone with banking and other phone services requiring touch
tone signals.
q Dial the service number and wait for the connection.
w Press
, then enter the numbers required. You will hear the
TONE/
tones on the line.
9. MUTING
Press
to turn off the microphone during a conversation.
MUTE
The TALK/BATT LOW LED blinks. You may speak to someone in the
room without the caller overhearing.
To resume normal conversation, press
or
.
MUTE
TALK
10. PAGING
To locate the handset while it is off the base, press
on the base
PAGE
unit. The handset beeps for 60 seconds, and IN USE/CHARGE LED
blinks. To stop paging, press
or any key at the handset, or return
PAGE
the handset to the base unit.
Note
You cannot page the handset during a call.
11. OUT OF RANGE
During a call, as you begin to move too far from the base, you first hear
a clicking sound. As you travel farther, the noise increases. Then you
should move close to the base unit. If you travel out-of-range, your call
terminates.
13
Advertisement
Table of Contents
