Morphy Richards intellisteam 48780 Manual page 8

48780MCZ-Rev1:48751 rev1
Setting timer using pre-set cook times
1 Plug into the electrical socket.
2 Set the time for each container using the
corresponding heater buttons. If using the front
container with the divider wall, use the separate right
and left heater buttons.
If using as one large container, use the dual heater
I
button .
3 Press the heater button to move the rectangle
it appears under the required food symbol (refer to
food symbols guide
the heater button is pressed. The cook time for each
food symbol will appear in the timer column. Repeat
this process for each container, the rectangle will flash
to indicate your last setting
• If using the back container for foods with different
cook times, set the timer to the longest cook time.
Alternatively, stop the appliance during cooking and
add the food with the shortest cook time.
4 Press the steam button
bleep will sound and the display screen and steam
button will illuminate brightly until cooking and keep
warm finishes. The timer will count down from the
longest cook time so everything finishes together
• When cooking has finished, the alarm will sound and
the keep warm function will start automatically for 40
minutes. To stop, press the steam button once. After
40 minutes, the keep warm function will automatically
L
turn off . Always check there is water in the water
reservoir when using the keep warm function.
Food symbols guide Û
Soft boiled eggs,
pre-set time: 16 minutes
Leaf & Pod vegetables,
pre-set time: 15 minutes
Chicken,
pre-set time: 27 minutes
Fish,
pre-set time: 20 minutes
Root vegetables,
pre-set time: 35 minutes
Sauce,
pre-set time: 30 minutes
Rice,
pre-set time: 42 minutes
Keep warm
pre-set time: 40 minutes
Pre-set times are a guide and based on
approximately 4 portions. Refer to cooking guide
for portion and specific food type adjustments.
8
8
12/9/08 15:53
Ú
until
Û
). A bleep will sound each time
J
.
Ï
once to begin cooking. A
K
Ù
,
Page 8
Adjusting the timer
The timer can be adjusted for portion sizes and
specific food types (see cooking guide) or to suit your
personal preferences.
1 Press the heater button until the rectangle appears
under the food symbol you want to adjust.
2 Press the upwards arrow button to increase the cook
time or the downwards arrow button to decrease the
cook time. Each time the arrow button is pressed, a
bleep will sound and the time will increase/decrease
M
by one minute .
3 Repeat the process for each container as required.
Saving time adjustments
To save your personal time adjustments for future use,
hold down the steam button for two seconds. One
bleep will sound, indicating steaming has begun, the
second bleep indicates your time adjustments have
N
been saved .
• If you do not want to save your personal time settings
for future use, press the steam button once to start
cooking.
Reverting back to pre-set times
.
1 Plug into the electrical socket.
2 Before pressing any other buttons, hold down the
increase steam time button for 2 seconds until a bleep
is heard. Repeat for the decrease steam time button
O
.
• Intellisteam is now set to the original
pre-sets.
To cook rice
1 Add rice to the rice tray. For every 75g of rice, add
122ml of cold water and stir.
2 Set the time using the pre-set time for rice or adjust if
required.
To stop steaming during cooking
• To stop steaming, press the steam button once. The
alarm will sound and the illuminated display screen
and steam button will dim.
• To re-start steaming, press the steam button once. A
bleep will sound and cooking will start from when it
stopped.
Keep warm function
When cooking has finished, the alarm will sound and
the keep warm function will start automatically for 40
minutes. To stop, press the steam button once. After
40 minutes the keep warm function will automatically
turn off.
Always check there is water in the water reservoir
when using the keep warm function. To check the