For More Information - Motorola Avigilon H5SL Series Installation Manual

Note: The ARP/Ping Method will not work if the Disable setting static IP address through ARP/Ping
method check box is selected in the camera's web browser interface. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
1. Locate and make note of the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a. arp -s <New Camera IP Address> <Camera MAC Address>
For example: arp -s 192.168.1.10 00-18-85-12-45-78
b. ping -l 123 -t <New Camera IP Address>
For example: ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command Prompt window when you see the following message:
Reply from <New Camera IP Address>: ...

For More Information

Additional information about setting up and using the device is available in the following guides:
Avigilon Control Center Client User Guide
l
Web Interface User Guide — Avigilon High Definition H4 and H5 IP Cameras
l
Avigilon USB Wi-Fi Adapter System User Guide
l
Avigilon Camera Configuration Tool User Guide
l
Designing a Site with Avigilon Video Analytics
l
These guides are available on
downloads.
For More Information
help.avigilon.com and on the Avigilon website: avigilon.com/support-and-
43