Rear-Panel Troubleshooting Indicators - HP ProLiant DL360 G7 Maintaining And Troubleshooting

Maintaining and Troubleshooting the HP DL360 G7 Server
No.
9
10
Note:
In addition to the indicators listed above see also UG: Front panel LEDs and buttons.

Rear-panel troubleshooting indicators

No.
1
2
3
4
5
6
7
8
9
10
11
12
Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server
8
Description
Hard disk drive LEDs
Hard disk drive LEDs
Description
Slot 1 PCIe2 x8 (8, 4, 2, 1)
Slot 2 PCIe2 x16 (16, 8, 4, 2, 1), 75W +EXT 75W*
Power supply LEDs
Optional power supply LEDs
iLO 3 connector
Serial connector
Video connector
NIC LEDs
NIC LEDs
NIC LEDs
NIC LEDs
USB connectors (2)
Comments on this document? infodev@avaya.com
Note:
A half HT faceplate is required, and you might
need to remove the full faceplate and replace it
with a half faceplate (requires a Phillips
screwdriver). If adding a NIC, PCI Slot 1 must
be used prior to slot 2 (applies to NICs only).
November 2010