DURKOPP ADLER 550-867 Additional Instructions page 9

Setting up the fingerprint scanner
6. Display the data stored on the USB key.
 The USB key holds the following files:
7. Minimize the window.
sab_867.exe
8. Click on the Windows Start button.
9. Select the following path from the options shown to the right of the Start
 This folder already houses a .exe file named sab_867 and a .txt file
Information
These old files sab_867 and Options must be replaced with new files of
the same name, which are stored on the USB key. If you do not wish to
delete the old files, you need to save them under a different name or in a
different location. Otherwise, the new files of the same name will overwrite
the old files.
10. Rename the old file sab_867 if necessary.
11. Copy the new file sab_867 from the USB key to the folder SABSoft.
 Unless renamed previously, the old file sab_867 will now be
Important
The NEW software MUST be named sab_867 for the fingerprint scanner
to work.
Options.txt
12. Rename the old file Options if necessary.
13. Copy the new file Options from the USB key to the folder SABSoft.
 Unless renamed previously, the old file Options will now be
Important
The NEW software MUST be named Options for the fingerprint scanner
to work. Do not change the entries in the Options.txt file.
Additional Instructions 550-867 - 01.0 - 02/2019
• sab_867.exe
• Options.txt
• Messages.csv
• Messages.txt
• Messages.xlsx
menu: Computer-->Local Disk (C:)-->SABSoft
named Options.
replaced by the new file sab_867.
replaced by the new file Options .
7