DURKOPP ADLER 550-867 Additional Instructions page 12

To connect the fingerprint scanner:
1. Place the fingerprint scanner (3) on the right next to the machine.
2. Feed the connecting cable (2) down through the cable opening (1) and
Fig. 7: Connecting the fingerprint scanner (2)
(4) - Control box
3. Insert the connecting cable (2) into the control box (4) under the
4. Switch on the machine ( Operating Instructions and  Service
Fig. 8: Connecting the fingerprint scanner (3)
(5) - USB plug
10
under the tabletop without kinking or crushing the cable.
tabletop.
The control box (4) can only be accessed behind the engineered
workstation located under the tabletop.
Instructions).
Setting up the fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019
④
⑤