DURKOPP ADLER 550-867 Additional Instructions page 18

Fig. 15: Creating a new user using fingerprint detection (3)
4. Enter User name, Personnel number and Password into the input
5. To define the desired security level for the new user, tap the 0, 1 or 2
 The check mark on the button indicates which security level has been
6. To store a user image, tap the User photo button.
Information
The user photo can also be stored at a later time ( Operating Instructions
and  Service Instructions).
The fingerprint must be immediately linked to a user profile as it cannot be
added later once the user has been set up.
7. Tap the FingerPrnt button.
 The display switches to:
16
fields of the same name.
button.
selected (in this case, 0).
Additional Instructions 550-867 - 01.0 - 02/2019
Operation