Connecting & Setting Up; Quick Overview - Toshiba D-R3 Owner's Manual

00566A-D-R3_14~35 8/31/04 10:28 AM Page 14
Connecting
& Setting Up
This section involves various methods of
connecting the DVD player to other external
components and required initial setting modes.
Quick Overview ................................................14
Step 1 : Unpacking...........................................15
Step 2 : Connecting SCART Cable
Step 3 : Other type of connecting the
Video output cable..............................17
Step 4 : Other type of connecting the
Audio output cable .............................18
Step 5 : Connecting to AV 3, AV 4, DV input jack .20
Step 6 : Preparing the Remote Control ..........21
14
- English

Quick Overview

A Quick Overview presented in this guide will give you
enough imformation to start using the recorder.
Step 1 : Unpacking
†
Step 2 : Connecting SCART Cable
†
Step 3 : Other type of connecting the Video output cable
†
Step 4 : Other type of connecting the Audio output cable
†
Step 5 : Connecting to AV 3, AV 4, DV input jack
†
Step 6 : Preparing the Remote Control
15
.................
Note to CATV system installer: This reminder is
provided to call CATV system installer's attention to
Article 820-40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.