Using Automatic Document Feeder (Optional) - Toshiba e-STUDIO203 Operator's Manual

Using Automatic Document Feeder (optional)

When a stack of originals are placed on the Automatic Document Feeder (optional), the originals
are automatically scanned one by one. The following types of originals are available:
Media types
Plain paper
Some media types may not be used.
The maximum number of sheets acceptable varies depending on the media types of the
originals.
A5 size originals must be placed in a landscape direction.
Sizes which the Automatic Document Feeder (optional) can detect automatically are A3, A4,
A4-R, A5-R, B4, B5 and B5-R.
Precautions for Automatic Document Feeder (optional)
Do not use the following types of original since such types may cause a paper jam or damage to
the equipment:
Extremely wrinkled, folded or curled ones
Ones with carbon paper
Taped, pasted or cut-out ones
Clipped or stapled ones
Ones with holes or tears
Damp ones
Overhead transparencies or tracing paper
Coating paper (e.g. coated with wax)
The following types of originals are usable but need extra care:
Ones which cannot be slid with fingers or whose surface is specially treated (they may not be
separated from each other at feeding)
Folded or curled ones (should be smoothed out before being used)
When black streaks appear on the copied image
If the scanning area or the guide area is dirty, image problems such as black streaks on the cop-
ied image may occur. Weekly cleaning of these areas is recommended.
P.100 "Daily Inspection"
Maximum number of
Maximum size
sheets acceptable
297 mm x 432 mm 100 sheets
(or stack height 16 mm)
Paper weight
2
50 - 127 g/m
Placing Originals 45