2 HOW TO MAKE COPIES
Placing Originals
Acceptable originals
Booklets, three-dimensional objects and some types of special media can be placed on the orig-
inal glass, as well as plain paper. When the Automatic Document Feeder (optional) is used, a
stack of plain paper originals can be automatically scanned one by one.
Setting position
Original glass
Automatic
Document Feeder
(optional)
*1 The automatic size detection function is not enabled for LT format. (LT format is a standard paper size
for North America.)
*2 "Special media types" refers to special paper which is not acceptable for the Automatic Document
Feeder (optional), such as overhead transparencies or tracing paper.
*3 Do not place heavy objects (4 kg or more) and do not press on it with force.
*4 Its paper weight should be between 50 g/m
*5 Some media types may not be used.
*6 A5 size originals must be placed in a landscape direction.
When the built-in memory has become full during scanning
When the built-in memory in the equipment has become full during the scanning of the copy job,
scanning stops even if the number of sheets scanned so far has not exceeded the maximum
value. In this case, the [FUNCTION CLEAR] lamp blinks and the [START] lamp is lit.
Press the [START] button to copy and cause the data scanned so far to exit. Press the
[FUNCTION CLEAR] button to delete all the data scanned so far.
42
Placing Originals
Type of origi-
Maximum
nals
size
Plain paper
297 mm x 432
Special media
mm
*2
types
Booklets
3-dimensional
objects
Plain paper
2
and 127 g/m
Acceptable sizes for auto-
*1
matic size detection
Not acceptable for automatic
size detection
A3, A4, A4-R, A5-R, B4, B5,
B5-R of standard sizes
2
.
Remarks
*3
*4, *5, *6