4-way Air Discharge Cassette Type
11.
ADVANCED SETTINGS
Swing mode
1
Push
the air conditioner is not working.
•
, symbol, and numbers flash.
2
Push
an indoor unit to be set.
• Each time you push the button, the unit numbers
change as follows:
UNIT No.
1-1
Not
display
The fan of the selected unit runs and the louvers
start swinging.
3
Push TIME
type.
Three types of swings are available:
• Standard swing
The four louvers swing in the same direction.
• Dual swing
Louvers 01 and 03 are directed and swing in
one direction, and/then louvers 02 and 04 are
directed and swing in the opposite direction.
(When louver 01 is directed downward, louver
02 is directed horizontally.)
• Cycle swing
The four louvers swing independently at
respective timings.
17-EN
3
for at least four seconds when
(left side of the button) to select
UNIT No.
UNIT No.
1-2
1-3
UNIT No.
1-4
buttons to select a swing
Refrigerant
pipe
04
Drain
pipe
SET DATA
0001
0002
0003
• Do not set the SET DATA to "0000".
(This setting may cause a failure of the louvers.)
4
Push
button.
5
Push
button to complete the setting.
– 17 –
Owner's Manual
1
2
03
01
SET DATA
Swing of louvers
Standard swing
(Factory default)
Dual swing
Cycle swing
CAUTION
02