1-1 3D Scanning Sensor Unit
Supported Models
Roland DG MDX-40series
Techsoft TS-30
Most of the figures in this document depict the MDX-40.
Unit Features
This is an optional unit that enables you to use any of the preceding compatible models of modeling
machines as a 3D scanner. Replacing the spindle unit with the sensor unit adds contacting 3D-scanner
functionality. Dedicated programs for 3D scanning and for editing 3D data are included.
Checking the Included Items
Sensor unit
Clay
* A 2.5-mm hexagonal wrench is included with the modeling machine.
8
Cap screws (black)
Roland Software Package
CD-ROM
Hexagonal wrench (3 mm)*
User's Manual (this manual)