Connecting Up Your Digital Receiver; Connecting The Antenna - Topfield TF 7000 HD PVRt User Manual

Topfield high definition digital terrestrial receiver personal video recorder model tf 7000 hd pvrt user guide

Hide thumbs Also See for TF 7000 HD PVRt:

Table of Contents

2.4 Connecting up your digital receiver

There are several ways to set up the digital receiver. Set up

the digital receiver suitably to your television and other appli-

ances. If you have any problem with your setup or need help,

contact technical support on the back of this instuction book

under warranty information.

Whatever sort of connection you have between the digital re-

ceiver and the television, you need to connect the digital re-

ceiver to your television antenna so that it can receive digital

television services.

Normally you do that by using a loop cable to link from the

RF LOOP 1 OUT connector to the ANT 2 connector.

NOTE

However, if you are in a weak signal area, or are using a signal

ampliﬁer with more than one output, you may achieve better

results by connecting a cable from the antenna or ampliﬁer di-

rectly to the ANT 2 connector rather than using the loop cable.

If you have another digital receiver, or you want to still re-

ceive analogue channels on your television, link it from the

RF LOOP 2 OUT connector.

2.4 Connecting up your digital receiver 11

Connect the antenna cable to the ANT 1 con-

nector on the back panel of the digital re-

ceiver.

Also, you must ensure that there is a connec-

tion to both the ANT 1 and ANT 2 connectors

on your digital receiver, so that both tuners

work properly.

Table of Contents