Inserting Batteries In The Remote Control - Topfield TF 7000 HD PVRt User Manual

Topfield high definition digital terrestrial receiver personal video recorder model tf 7000 hd pvrt user guide

Hide thumbs Also See for TF 7000 HD PVRt:

Table of Contents

14 Setup

To connect the audio connectors

2.4.3 Inserting batteries in the remote control

NOTE

You cannot view high deﬁnition video with the composite

video connector.

To insert the batteries, open the battery compartment by re-

moving the lid, and then insert the batteries observing the po-

larity, which is marked on the base of the battery compart-

ment.

If the digital receiver no longer reacts properly to remote con-

trol commands, the batteries may be ﬂat. Be sure to remove

used batteries. The manufacturer accepts no liability for dam-

age resulting from leaking batteries.

You will need to obtain an audio cable (RCA

cable) to connect the audio connectors. Plug

one end of the cable into the AUDIO L

(white) and AUDIO R (red) sockets on the

digital receiver, and the other end into the

matching sockets on your television or au-

dio system.

To enjoy Dolby digital audio, your televi-

sion or audio system must be able to de-

code Dolby digital audio, and you will need

to obtain a S/PDIF cable.

use the COAXIAL connector, prepare a coax-

ial S/PDIF cable (RCA cable); otherwise, to

use the OPTICAL connector, prepare an op-

tical S/PDIF cable. Plug one end of the ca-

ble into the S/PIDF socket on the digital re-

ceiver, and the other end into the matching

socket on your audio system.

If you want to

Table of Contents