10 Setup
2.4 Connecting up your digital receiver
2.4.1 Connecting the antenna
VIDEO
7
S/PDIF
8
RS-232
9
Table 2.3: Connectors specifications
HDMI
High definition video output
Left & right audio output
Dolby Digital audio output
VIDEO
Composite video (CVBS) output
AUDIO
Left & right audio output
YPbPr
Component video (YUV) output
S/PDIF
Dolby digital audio output
RS-232
115.2 kbps at maximum
There are several ways to set up the digital receiver. Set up the
digital receiver suitably to your television and other appliances.
If you have any problem with your setup or need help, contact
your dealer.
Composite video output socket for the televi-
sion set. (yellow)
Dolby digital output socket for the audio sys-
tem.
Serial port for firmware update and data
transfer.
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to
your television antenna so that it can receive
digital television services.
Connect the antenna cable to the ANT IN con-
nector.
If you have another digital receiver, you may
link the ANT OUT connector to your televi-
sion.