A/V Output Setting - Topfield TF4000Fe User Manual

MENU OPERATIONS

A/V Output Setting

The STB has many A/V Outputs. Control this menu properly according to external
components connected to the STB. Configurations concerning Audio and Video can be
made here.
A. TV Type
Select your TV standard. For automatic PAL/NTSC selection, set it to Multi.
B. Video Output
Select the mode of Video output among RGB, S-Video, YUV and CVBS on TV SCART
by using V- , V+buttons.
C. TV Aspect Ratio
Select your TV screen format. Select 4:3 or 16:9 mode by using V- , V+buttons.
D. Display Format
If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can
select the display format. Select the Letter Box or Center extract by using V- , V+
buttons.
E. Sound Mode
It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right
mode by using V-,V+ buttons. The Sound mode is configurable later on by using aud
button on your RCU.
F. RF Output
When the STB is connected to the TV by an RF cable, you may need to select the
correct TV standard system. Select the PAL G, PAL I, PAL K, NTSC M mode by using
V- , V+buttons.
G. RF Channel
Select a UHF channel by using V- , V+ buttons. The default UHF channel is CH36.
When you change the UHF channel number, you must also change to the same value
on the TV. If you do not, there will be no picture and sound.
19