12 Setup
2.4 Connecting up your digital receiver
VCR Audio and video input/output socket for the video
10
cassette recorder or suchlike.
S/PDIF Dolby digital output socket for the audio system.
11
RS-232 Serial port for firmware update and data transfer.
12
USB USB port for firmware update and data transfer.
13
WLAN ANT Antenna for wireless local area network. See
14
Chapter 8.
AC INPUT Power cord socket.
15
Table 2.3: Connectors specifications
VIDEO
Composite video (CVBS) output
AUDIO
Left & right audio output
S-VIDEO
Super video (S-Video) output
YPbPr
Component video (YUV) output
TV
CVBS/S-Video/RGB/YUV video output
Left & right audio output
VCR
CVBS video output
Left & right audio output
CVBS/S-Video/RGB/YUV video input for bypass
Left & right audio input for bypass
S/PDIF
Dolby digital audio output
RS-232
115.2 kbps at maximum
USB
2.0
There are several ways to set up the digital receiver. Set up the
digital receiver suitably to your television and other appliances.
If you have any problem with your setup or need help, contact
your dealer.