Table of Contents
Advertisement
The other is K
band which ranges approximately from 12 to
u
18 GHz.
Pressing the
button on the Satellite Name option displays
OK
the satellite list in alphabetic order. Select the satellite toward
which your antenna is set to face.
You have to specify which tuner is connected to your selected
satellite. If it is LNB 1 IN, set the Tuner Select option to Tuner
1; otherwise, set it to Tuner 2.
If you have connected the IF 1 OUT and LNB 2 IN with a loop-
through cable, then set the Connection Type option to Loop
Through; otherwise, set it to Separated.
4.1 Searching broadcasting services 29
The LNB (Low Noise Block converter)
is used to take a wide band of relatively
high frequencies, amplify and convert
them to similar signals that is carried
at a much lower frequency, which is
called Intermediate Frequency (IF).
High frequencies from satellites are
converted into 950 to 2150 MHz by a
LNB.
Select the Installation
ting menu to configure the LNB
settings.
screen like the left figure.
LNB Set-
You should see a
Advertisement
Table of Contents
