Searching Services - Topfield TF 5000 CI User Manual

30 Service Search

4.1.4 Searching services

1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input your location to the My Longitude and My Latitude
options with the
3. Input the position of your selected satellite to the Satel-
lite Angle if it is not correct.
4. Select the Goto the position option. Then the antenna
will turn toward your selected satellite calculating its
position.
5. If the receiving quality, which is displayed on the right
bottom on the screen, is not good, then tune the antenna
finely with the options of the Move menu. The changed
position is automatically saved at one. At this time you
had better check the receiving quality of every trans-
ponder and choose the best one at the Transponder (or
Frequency) option. It will be helpful to your fine tuning.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.
, and numeric buttons.
V V
To perform service search, se-
lect the Installation
Search menu.
Service