Topfield TF 5000 CI User Manual page 18

Digital satellite receiver
Hide thumbs Also See for TF 5000 CI:
Table of Contents

Advertisement

12 Setup
To use the composite video connector
To connect the audio connectors
To use the RF connector
If you connect with a standard SCART cable, you do not have
to make audio connections because the SCART connector can
output stereo audio. But if you do with a conversion cable,
such as SCART-to-Component, you have to make audio con-
nections.
If your television does not have any video and audio input,
you will need to use the radio frequency output from the dig-
ital receiver.
You will need to obtain a composite video
cable (RCA cable) to use the composite video
connector. Plug one end of the cable into
the VIDEO (yellow) socket on the digital re-
ceiver, and the other end into the matching
socket on your television.
You will need to obtain an audio cable (RCA
cable) to connect the audio connectors. Plug
one ends of the cable into the AUDIO L
(white) and AUDIO R (red) sockets on the
digital receiver, and the other ends into the
matching sockets on your television or au-
dio system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tf 5100 ci

Table of Contents