ASROCK EP2C622D16FM User Manual page 38

Step 3
Move the standoff based on the
module type and length.
Skip Step 3 and 4 and go straight
to Step 5 if you are going to use the
NUT80 NUT42
default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
NUT80 NUT42
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
NUT80 NUT42
orientation.
NUT80 NUT42
20
o
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
NUT80
NUT2 NUT1
32