Table of Contents
Advertisement
LAN LED Connector
(FRONT_LED_LAN34)
(see p.6, No. 4)
Serial Port Header
(9-pin COM)
(see p.6, No. 34)
PSU SMBus
(5-pin PWR_PMB)
(see p.6, No. 1)
Intelligent Platform
Management Bus Header
(4-pin IPMB1)
(see p.6, No. 25)
Backplane Management
Controller SMBus Header
(5-pin BPB_SMB)
(see p.6, No. 2)
SLIMLINE Connectors
(SLIMLIN1)
(see p.6, No. 23)
(SLIMLIN2)
(see p.6, No. 24)
28
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK
1
RRXD1
DDTR#1
DDSR#1
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
GND
SMBDATA
1
SMBCLK
+3VSB
ALERT
IPMB_SDA
IPMB_SCL
GND
No Connect
+3VSB
SMBUS_CLK
GND
SMBUS_DATA
S LIMLIN 2
S LIMLIN 1
These 4-pin connectors
are used for the front
LAN status indicator.
This COM header supports a
serial port module.
PSU SMBus monitors the
status of the power supply, fan
and system temperature.
This 4-pin connector is
used to provide a cabled
base-board or front panel
connection for value added
features and 3rd-party add-
in cards, such as Emergency
Management cards, that
provide management features
using the IPMB.
The header is used for the SM
BUS devices.
These connectors are used for
the NVME PCIE devices.
Advertisement
Table of Contents
