Table of Contents
Advertisement
Support OS
OS
Environment
Temperature
NOTE: Please refer to our website for the latest specifications.
This motherboard supports Wake from on Board LAN. To use this function, please make
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certification tests. If you install the drivers only, it
will pass the WHQL tests.
4
Microsoft® Windows® (Server OS)
- Server 2012 R2 (64 bit)
- Server 2016 (64 bit)
Linux®
- RedHat Enterprise Linux Server 6.8 (64 bit) / 7.4 (64 bit)
- CentOS 6.8 (64 bit) / 7. 4 (64 bit)
- SUSE Enterprise Linux Server 11 SP4 (64 bit) /12 SP3 (64 bit)
- FreeBSD 11 (64 bit)
- Ubuntu 16.04/15.10 (64 bit)
Virtual:
- VMWare ESXi 6.5
* Please refer to our website for the latest OS support list.
* Before installing the Linux OS, please first enter the BIOS settings, go to
"Advanced" > "Chipset Configuration" and set "IGPU Multi-Monitor" option
to "Disabled".
- Operation temperature: 10°C ~ 35°C /
Non operation temperature: -40°C ~ 70°C
*Install a CPU Fan when the airflow through the heatsink is below 2CFM.
Advertisement
Table of Contents
